Datasheet4U Logo Datasheet4U.com

NJW1241 - 3-Chanels Differential Output Line Amplifier

General Description

amplifier for High Voltage Pre-out of Car AV system.

It can swing 5Vrms(14.1V peak-to peak) singal at 8V opearating voltage /single-end output because of including the charge pump circuit.

Key Features

  • S l Operating Voltage 6.0V to +10V l Operating Current IDD=12mA typ. at V+=8V, RL=47kΩ, No Signal l Maximum Output Voltage l Low Distortion l Output Coupling Capacitor-less l External Synchronizing l Pop Noise Suppression Circuit l External Mute l Gain Select 5.0Vrms min. @single-end output 0.004% typ Divide-by-2 +6dB/+8dB l RF Immunity OpAmp tolerant to FR noise. (ex. mobile phone) l Bi-CMOS Technology l Package Outline SSOP32 NJW1241V.
  • BLOCK.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NJW1280 High Capacitance Piezo-sounder Driver JRC
NJW1112 8-In 4-Out Stereo Audio Selector NJR Corporation
NJW1119A 3-Band Tone Control IC JRC
NJW1124 Voice Switched Speakerphone circuit NJR Corporation
NJW1128 Voice Switched Speakerphone Circuit NJR Corporation

Other Datasheets by New Japan Radio

Part Number Description
NJW1240 5Vrms Ground Referenced 6-Channel Line Amplifier
NJW1200 Low-Voltage 2-channel Electronic Volume
NJW1201A 2ch Electronic Volume
NJW1222 4.1-channel Electronic Volume
NJW1230 1ch Video Amplifier & 2Vrms Ground Referenced Stereo Line Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NJW1241 3-Chanels Differential Output Line Amplifier „ GENERAL DESCRIPTION The NJW1241 is a differential output 3-channel audio line amplifier for High Voltage Pre-out of Car AV system. It can swing 5Vrms(14.1V peak-to peak) singal at 8V opearating voltage /single-end output because of including the charge pump circuit. Ground-referenced outputs eliminate output coupling capacitor. The pop noise suppression circuit reduces a pop noise at the power-on and power-off. PACKAGE OUTLINE „ FEATURES l Operating Voltage 6.0V to +10V l Operating Current IDD=12mA typ. at V+=8V, RL=47kΩ, No Signal l Maximum Output Voltage l Low Distortion l Output Coupling Capacitor-less l External Synchronizing l Pop Noise Suppression Circuit l External Mute l Gain Select 5.0Vrms min. @single-end output 0.